Industry

ANTIFOAM AF-S-10

FEATURES:

The antifoam AF-S-10 is a silicone-based emulsion. It is intended for the detergent industry, wastewater treatment and waste yeast, for controlling foam for liquid surface mixtures … It is highly soluble in water and other solvents.
The AF-S-10 shows very good compatibility and stability, so there is no separation of the emulsion. As a result, we obtain very efficient and permanent foam control.

AF-S-10 basic characteristic and advantages:
• total absence of mineral and organic acids,
• good resistance to bacteria,
• good distribution,
• good efficiency if the surface of the foam is treated with product de-icing.

USE:

AF-S-10 can be used in the supplied composition or diluted with water to the desired concentration, depending on system characteristics, temperature, pH, amount of foam, degree of agitation … Dilution and dosing instructions: continuous and discontinuous dosing with membrane dosing pomp or manually.

STORAGE AND DURABILITY:

The AF-S-10 emulsion has a shelf life of at least 12 months from the date of manufacture. Store the product at ambient temperature, preferably above 0 ° C and below 38 ° C. Keep containers well closed to prevent absorption of water from the atmosphere.
The product may break up after the expiration of the deadline but this does not have to mean that it is unusable. It can be homogenized (shaking or mixing) and further in use with the manufacturer.

PHISICAL AND CHEMICAL CHARACTERISTICS:

ANTIFOAM AF-S-17

FEATURES:

The antifoam AF-S-17 is a silicone-based emulsion. It is intended for the detergent industry, wastewater treatment and waste yeast, for controlling foam for liquid surface mixtures … It is highly soluble in water and other solvents.
The AF-S-17 shows very good compatibility and stability, so there is no separation of the emulsion. As a result, we obtain very efficient and permanent foam control.

AF-S-17 basic characteristic and advantages:
• total absence of mineral and organic acids,
• good resistance to bacteria,
• good distribution,
• good efficiency if the surface of the foam is treated with product de-icing.

USE:

AF-S-17 can be used in the supplied composition or diluted with water to the desired concentration, depending on system characteristics, temperature, pH, amount of foam, degree of agitation … Dilution and dosing instructions: continuous and discontinuous dosing with membrane dosing pomp or manually.

STORAGE AND DURABILITY:

The AF-S-17 emulsion has a shelf life of at least 12 months from the date of manufacture. Store the product at ambient temperature, preferably above 0 ° C and below 38 ° C. Keep containers well closed to prevent absorption of water from the atmosphere.
The product may break up after the expiration of the deadline but this does not have to mean that it is unusable. It can be homogenized (shaking or mixing) and further in use with the manufacturer.

PHISICAL AND CHEMICAL CHARACTERISTICS:

ANTIFOAM AF-S-20

FEATURES:

The antifoam AF-S-20 is a silicone-based emulsion. It is intended for the detergent industry, wastewater treatment and waste yeast, for controlling foam for liquid surface mixtures … It is highly soluble in water and other solvents.
The AF-S-20 shows very good compatibility and stability, so there is no separation of the emulsion. As a result, we obtain very efficient and permanent foam control.

AF-S-20 basic characteristic and advantages:
• total absence of mineral and organic acids,
• good resistance to bacteria,
• good distribution,
• good efficiency if the surface of the foam is treated with product de-icing.

USE:

AF-S-20 can be used in the supplied composition or diluted with water to the desired concentration, depending on system characteristics, temperature, pH, amount of foam, degree of agitation … Dilution and dosing instructions: continuous and discontinuous dosing with membrane dosing pomp or manually.

STORAGE AND DURABILITY:

The AF-S-20 emulsion has a shelf life of at least 12 months from the date of manufacture. Store the product at ambient temperature, preferably above 0 ° C and below 38 ° C. Keep containers well closed to prevent absorption of water from the atmosphere.
The product may break up after the expiration of the deadline but this does not have to mean that it is unusable. It can be homogenized (shaking or mixing) and further in use with the manufacturer.

PHISICAL AND CHEMICAL CHARACTERISTICS:

ANTIFOAM AF-S-30

FEATURES:

The antifoam AF-S-30 is a silicone-based emulsion. It is intended for the detergent industry, wastewater treatment and waste yeast, for controlling foam for liquid surface mixtures … It is highly soluble in water and other solvents.
The AF-S-30 shows very good compatibility and stability, so there is no separation of the emulsion. As a result, we obtain very efficient and permanent foam control.

AF-S-30 basic characteristic and advantages:
• total absence of mineral and organic acids,
• good resistance to bacteria,
• good distribution,
• good efficiency if the surface of the foam is treated with product de-icing.

USE:

AF-S-30 can be used in the supplied composition or diluted with water to the desired concentration, depending on system characteristics, temperature, pH, amount of foam, degree of agitation … Dilution and dosing instructions: continuous and discontinuous dosing with membrane dosing pomp or manually.

STORAGE AND DURABILITY:

The AF-S-30 emulsion has a shelf life of at least 12 months from the date of manufacture. Store the product at ambient temperature, preferably above 0 ° C and below 38 ° C. Keep containers well closed to prevent absorption of water from the atmosphere.
The product may break up after the expiration of the deadline but this does not have to mean that it is unusable. It can be homogenized (shaking or mixing) and further in use with the manufacturer.

PHISICAL AND CHEMICAL CHARACTERISTICS:

ANTIFOAM S 27

FEATURES:

Good resistance to bacteria
Total Absence of Metals, Mineral Acids and Organic Acids
Excellent power to suppress the foam
Good weather resistance against foam. It effectively suppresses the formation of foam due to the suitable values of surface tension and the power of distribution. Especially effective if the surface of the foam is treated with the product’s disinfection.

USE:

It is applied in all industrial aquatic systems:
purification of wastewater and suppression of foam in waste yeast.
Antifoamer S 27 is intended for aqueous, slightly alkaline-strongly acid, cold or warm media.

STORAGE AND DURABILITY:

The shelf life is marked on the label of the product. If, after the expiration of the shelf-life, the emulsion is stratified, the same can be used with the manufacturer’s recommendation on the necessary corrections (additional mixing, examination of activities, etc.)

PHISICAL AND CHEMICAL CHARACTERISTICS:

ANTIFOAM ZG-AF-11

FEATURES:

The granular antifoamer ZG-AF-11 is the optimal mixture of active companions on the appropriate carrier. It is intended for control of foam in powder detergents during machine wash.

Basic characteristics and benefits:
• Active at low concentrations
• Resistant to aging in hot and humid formulations of powder detergents
• Granules are stable, not grudging.
• Suitable for a wide range of pH and washing temperatures.
• Water hardness does not affect performance
• Inert with an alkaline environment of detergents in which it is incorporated

USE:

The granular antifoam agent ZG-AF-11 is easily incorporated into powder formulations of detergents by dry mixing, which is the recommended method.
The recommended dose in powdered detergent formulations is from 0.5 to 3.5% depending on the level and type of surfactants in the detergent formulation.

STORAGE AND DURABILITY:

If the product is stored at a temperature below 30 ° C, the original shelf life is 12 months. The product should be stored in a dry place.

PHISICAL AND CHEMICAL CHARACTERISTICS:

ANTIFOAM ZG-AF-12

FEATURES:

The granular antifoamer ZG-AF-12 is the optimal mixture of active companions on the appropriate carrier. It is intended for control of foam in powder detergents during machine wash.

Basic characteristics and benefits:
• Active at low concentrations
• Resistant to aging in hot and humid formulations of powder detergents
• Granules are stable, not grudging.
• Suitable for a wide range of pH and washing temperatures.
• Water hardness does not affect performance
• Inert with an alkaline environment of detergents in which it is incorporated

USE:

The granular antifoam agent ZG-AF-12 is easily incorporated into powder formulations of detergents by dry mixing, which is the recommended method.
The recommended dose in powdered detergent formulations is from 0.5 to 4.0% depending on the level and type of surfactants in the detergent formulation.

STORAGE AND DURABILITY:

If the product is stored at a temperature below 30 ° C, the original shelf life is 12 months. The product should be stored in a dry place.

PHISICAL AND CHEMICAL CHARACTERISTICS:

ANTIFOAM S 17Y

FEATURES:

Powder antifoamer S 17Y is the optimal mixture of active compo- nents on the appropriate carrier. It is intended for control of foam in powder detergents during machine washing, and can be used in other branches of the chemical industry.

Basic characteristics and benefits:
• Effective control and foam regulation
• Keeps the performance even when storing powder detergents in warm and humid conditions
• Easy incorporation by dry mixing, freely flowing and not grudging
• Suitable for a wide range of surfactants, pH values and washing temperatures
• Water hardness does not affect performance

USE:

Powdered antifoam S 17Y is easily incorporated into powder detergents for laundry by dry mixing.
The recommended dosage level is 0.5-4.0% depending on the level of surfactants and the composition of the detergent itself.

STORAGE AND DURABILITY:

It is packed in paper jacks of 30kg and Jambo bags of 500 and 1000kg.

PHISICAL AND CHEMICAL CHARACTERISTICS:

ANTIFOAM S 17Y-1

FEATURES:

Powder antifoamer S 17Y-1 is the optimal mixture of active compo- nents on the appropriate carrier. It is intended for control of foam in powder detergents during machine washing, and can be used in other branches of the chemical industry.

Basic characteristics and benefits:
• Effective control and foam regulation
• Keeps the performance even when storing powder detergents in warm and humid conditions
• Easy incorporation by dry mixing, freely flowing and not grudging
• Suitable for a wide range of surfactants, pH values and washing temperatures
• Water hardness does not affect performance

USE:

Powdered antifoam S 17Y-1 is easily incorporated into powder detergents for laundry by dry mixing.
The recommended dosage level is 0.5-3.5% depending on the level of surfactants and the composition of the detergent itself.

STORAGE AND DURABILITY:

It is packed in paper jacks of 30kg and Jambo bags of 500 and 1000kg.

PHISICAL AND CHEMICAL CHARACTERISTICS:

SILICONE EMULSION EM-20

FEATURES:

Silicon emulsion EM-20 is an aqueous emulsion of U / V type of medium-high viscosity polydimethylsiloxane oils. These silicone oils are characterized by temperature stability, good adhesive and slipperable properties, as well as transparency and physiological inactivity.

USE:
Silicone emulsions have wide application in industry as follows:
• Means for separating rubber products from the mold after vulcanization
• Separators and sliding agents in the production of plastic pipes
• Means for separating the transport equipment in the production of rubber
• Anti-adhesion agent for raw materials and extrudate mixtures in the rubber industry
• Separation means in the production of cables
• Finishing and softening agent for textiles and ends
• Slipper in the production of socks
• Separating agent in the production of expanded polystyrene
• Mold detergent for mold design in the foundry industry

STORAGE AND DURABILITY:

It is packaged in plastic containers of 25 liters, a 50-liter plastic drum or a 200-liter metal barrel.
Store the product at a temperature above 0 ° C – keep it from freezing.

PHISICAL AND CHEMICAL CHARACTERISTICS:

WOOLSIL 60H

FEATURES:

Woolsil 60H is an aqueous U / V emulsion of the type of medium-viscous organic polymers based on polymethylhydrogensiloxane and polysiloxane. These reactive oils are characterized by temperature stability, good adhesive and slip properties, as well as transparency and physiological inactivity.

USE:

Woolsil 60 H is primarily intended as auxiliary material for binders in the production of stone and glass wool and as a hydrophobic agent for plaster elements and plates. For this purpose, Woolsil 60 H can be dissolved with any amount of water. The recommended dosage is calculated on the weight of the end product
is 0.01 to 0.5%.

STORAGE AND DURABILITY:

Packaging: Plastic canisters of 25 and 50kg and IBC of 1000 kg
Dosage: Individually depending on the application and the process in which it is used.

PHISICAL AND CHEMICAL CHARACTERISTICS:

WOOLSIL 9051

FEATURES:

Woolsil 9051 is an aqueous emulsion of U / V type of medium-high viscosity organic polymers. These reactive oils are characterized by temperature stability, good adhesive and slip properties, as well as transparency and physiological inactivity.

USE:

Woolsil 9051 is primarily intended as auxiliary material for binders in the production of stone and glass wool. For this purpose, Woolsil 9051 can be dissolved with any amount of water. The recommended dosage calculated on the weight of the end product is 0.01 to 0.3% for stone and glass wool.

STORAGE AND DURABILITY:

Packaging: Plastic canisters of 25 and 50kg and IBC of 1000 kg
Dosage: Individually depending on the application and the process in which it is used.

PHISICAL AND CHEMICAL CHARACTERISTICS:

SILICONE COMPOUND AFC-9

FEATURES:

AFC-9 is a silicone compound with the features of antifoam. It is used for the suppression of foam in many aquatic and non-aqueous industrial systems as well as the production of food additives. AFC-9 has good foam content over a wide range of pH values, from highly alkaline to acidic environments.
AFC-9 FEATURES:
• total absence of mineral acids,
• organic acid content max. 0.1%,
• good resistance to bacteria,
• Good distribution,
• Good efficiency if the surface of the foam is treated with product de-icing.

USE:

• Chemical industry
• Production of adhesives
• Color industry
• Production of silicone antifoaming emulsions
AFC-9 can be used in the delivered composition, dispersed in water or dissolved in organic solvents (toluene, xylene, hexane, heptane …) depending on the characteristics of the system, that is, temperature, pH, amount of foam, degree of agitation …
Dosage: from 0.15% onwards, depending on customer’s need and the foam structure

PHISICAL AND CHEMICAL CHARACTERISTICS:

DM 1001-SILICON-ANTIFOAM COMPOUND

FEATURES:

COMPOUND DM 1001 is a viscous antifoamer whose main purpose is to control the foam in a wide range of surfactants.
COMPOUND DM 1001 is based on high molecular weight polysiloxanes with a viscosity of over 20000 mPas at 25 ° C. As such, it is suitable for controlling the foam in washing agents (powder and liquid detergents) and other means where surfactants are present.
Basic characteristics and benefits of the product:
• Efficient at low dosage levels in systems with high levels of surfactants
• Despite its high viscosity, it is well dispersed in water-based formulations of surfactants
• Suitable for a wide range of surfactants, Ph values ​​and washing temperatures
• In addition to antifoam in detergents, it plays a role as a humidity maintenance agent, whose efficiency is reduced by shearing forces and dispersive forces.

USE:

The COMPOUND DM 1001 can be applied to various powders or granules in a range of 5-15% and as such can be used as a powder or granular antifoam. The prepared antifoam is dosed in a powdered detergent recipe of 0.5-3.5%.
The COMPOUND DM 1001 is added to the liquid detergent structure as a foam depressant.
If the COMPOUND DM 1001 does not show itself as a sufficiently dispersing and compatible manufacturer’s recommendation, in this case, antifoaming agents are used in another form.
COMPOUND DM 1001 can be used in plastic processing such as ABS, HIPS, PP, PPE / PPO, PVC-F, PVC-R, TRE, TRO, TPU, SAN.
The COMPOUND DM 1001 can be used to formulate stable, slab-shaped fluid processing metals.
The COMPOUND DM 1001 can be used in other lubricating oils (transmissions and industrial fluids).
The COMPOUND DM 1001 is efficient in a large temperature range. Formulated to have good alkaline resistance, but the manufacturer’s recommendation is to always check the compatibility with the recipe of the detergent in which it is installed.
Recommended dose:
– Powder detergents 0.1-0.5%
– Liquid structure of detergents 0.2-0.4%
– Slerri dearth 0.01-0.05%

STORAGE AND DURABILITY:

The date of manufacture as well as the shelf life is on the label of the product. If the product expired, the shelf life does not necessarily mean that the product is unusable. With proper product testing and recommended finishing, the product can be successfully used.

PHISICAL AND CHEMICAL CHARACTERISTICS:

Y14 NOVOHEM – SILICON-ANTIOAM COMPOUND

FEATURES:

COMPOUND NHS-114 is a viscous antifoamer whose primary purpose is to control foam in a wide range of surfactants.
COMPOUND NHS-114 is based on high molecular weight polysiloxanes with viscosity over
60000 mPas at 25 ° C. As such, it is suitable for controlling the foam in washing agents (powder and liquid detergents) and other means where surfactants are present.
Their application is also possible in liquid detergent washing detergents as well as an agent for the removal of air in the production of gel products. In this production it serves as an antifoam.
For the same purpose (air extraction and foam control) it is used in the slider.
CHARACTERISTICS:
• Efficient at low dosage levels in systems with high levels of surfactants
• Suitable for a wide range of surfactants, Ph values ​​and washing temperatures
• It can also be used for Slurry dearth

USE:

COMPOUND NHS-114 can be applied to various powders or granules with a 5-15% ratio and as such can be used as a powder or granulated antifoam. The prepared antifoam is dosed in a powdered detergent recipe of 0.5-2%.
COMPOUND NHS-114 is suitable in small quantities to add to Slarry in the sense of preventing foam and draining excess air. If such a use is added to Slarry in the batten, in an aging bowl or in a pump dispenser in pipelines.
When it comes to structural liquid detergents and gel manufacturing, care must be taken of the dispersion and compatibility that can be easily examined. If Comppaund NHS-114 does not show itself as sufficiently dispersing and compatible manufacturer’s recommendation, in this case, antifoaming agents in the form of silicone emulsions are used.
Recommended dosage:
Dosage in Slarry: 0.01-0.05%
Powder detergent: 0.1-0.5%

STORAGE AND DURABILITY:

The date of manufacture as well as the shelf life is on the label of the product. If the product expired, the shelf life does not necessarily mean that the product is unusable. With proper product testing and recommended finishing, the product can be successfully used.

PHISICAL AND CHEMICAL CHARACTERISTICS:

CYNO 35 MA

FEATURES:

CYNO 35 MA is an amino silicone macro emulsion, designed to provide hydrophilicity, lushness and silky touch to all types of fabrics. The new formula CYNO 35 MA, with special additives, wraps the fabric fibers, which reduces the crease after washing, facilitates ironing, and the long lasting effect of the softness of the laundry in the formulation “2 in 1” of powdered detergents

USE:

Optimal treatment will depend on the requirements and the type of fabric or yarn after staining and flushing. The dosage depends on the desired effect;
– 0.25 to 1.20% in the formulation of powdered detergents

STORAGE AND DURABILITY:

Before each use, gently stir the emulsion.
The shelf life is marked on the label of the product (6 months). If, after the expiration of the shelf-life, the emulsion is stratified, the same can be used with the manufacturer’s recommendation on the necessary corrections (additional mixing, examination of activities, etc.).

PHISICAL AND CHEMICAL CHARACTERISTICS:

CYNO 40 MA

FEATURES:

CYNO 40 MA is a macro emulsion based on amino silicone, which represents the advancement in the production of softener. It is designed to provide a full, pleasant and silky touch, optimal moisture absorption for all types of fabrics. In addition, the CYNO 40 MA shows excellent compatibility and stability on different fabrics. It can be combined with conventional softener based on ester, which improves the properties of the blade during the washing cycle.

USE:

CYNO 40 MA can be easily diluted with water, with a slight mixing, to the appropriate concentration in application. The dosage depends on the desired effect:
-1- 3% in the formulations of a ready-to-wear softener
-1 part of the CYNO 40 MA changes 2-3 parts estervates in the previous formulations of laundry softener

STORAGE AND DURABILITY:

Before each use, gently stir the emulsion.
The shelf life is marked on the label of the product (6 months). If after the expiration of the shelf life, the emulsion is stratified, the same can be used with the manufacturer’s recommendation on the necessary corrections (additional mixing, examination of activities, etc.).

PHISICAL AND CHEMICAL CHARACTERISTICS: